Product Details:
Minimum Order Quantity | 1 Piece |
Bending Moment | 200 Nm (max) |
Load Reversal Frequency | 0 - 6000/min |
Gripping Diameter | 5 - 25 mm |
Grip to Grip Separation | 10 - 100 mm |
Testing Diameter for Standard Specimen | 4 - 16 mm |
The Rotary Bending Machine is used to study fatigue life of materials. This test uses a rotating specimen that is bent applying a load. On rotation, the specimen undergoes cyclic stress and eventually fails.
Product Details:
Minimum Order Quantity | 1 Piece |
Normal Load | 2 - 1000 N |
Frictional Force | 2 - 500 N |
Spindle Speed | 10 - 3000 rpm |
Roller Diameter | 100 x 16 mm |
Accuracy | 2 mm |
This Rolling Sliding Wear Test Rig is a multi-purpose rig. This rig allows testing of rolling and sliding contacts under a variety of conditions. It allows users to set constant load, progressive load, change in speed and slip ratio during the test. Frictional force, wear of the disks and temperature can be measured. Data can be acquired in real time. The system can be adapted to conduct tests using line contact, area contact, point contact for sliding conditions.
Applications:
Product Details:
Minimum Order Quantity | 1 Piece |
Normal Load Range | Up to 200 N |
Frictional Force Range | Up to 200 N |
Wear Measurement Range | 0 - 4 mm |
Disc Speed | 100 - 3000 rpm |
Wear Disc Diameter | 160 mm |
Preset Timer Range | Up to 99:59:59 |
Pin Length | 25 - 30 mm |
Specimen Pin Diameter | 3 - 12 mm |
Wear Track Diameter | 10 - 140 mm |
The Pin on Disk Tribometer is used to determine tribological characteristics of a wide range of materials in a variety of conditions like different normal loads and temperature settings. The operation of this system is by pressing a stationary pin, against a rotating disc at a specified speed. The sliding pin results in frictional force between the disc and the pin. This is measured using a load cell. Normal load and test speed can be set to the desired value.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Material | Mild Steel |
Grade | Automatic |
Dimension | 300 x 300 x 790 mm |
Resistance | 60 ohm |
Power Source | Electric |
Power Supply | 220 - 240 Volt AC |
Product Details:
Minimum Order Quantity | 1 Piece |
Material | Mild Steel |
Speed | 660 rpm |
Power Supply | 240 V AC |
Frequency | 60 Hz |
The Roller on Roller Tribometer is intended for friction and wear evaluations of materials and lubricants that operate under roll and slide conditions as seen in gears, railroads and other such applications. With two servo-controlled drives, this system is capable of performing tribological tests in pure sliding to rolling contact tests.
Features:
Product Details:
Material | Mild Steel |
Stroke | 0.5 - 2 mm |
Frequency | 10 - 100 Hz |
Power Supply | 220 V AC |