Ducom Instrumetns Pvt Ltd
Peenya, Bengaluru, Karnataka
GST No. 29AABCD9145R1ZV
TrustSEAL Verified
Call 0804898464282% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Piece |
| Abrasive Slurry | Alumina and water |
| Speed | 100 - 250 rpm |
| Test Load | 100 - 300 N |
| Revolution Controller | 1 - 9999 revs (digital preset counter) |
The Slurry Abrasion Test Rig is used to determine the resistance of materials to abrasion by wet sand and rubber wheel. The tester presses a test sample against a rotating wheel with a known force. The test area is contained and submerged in a wet abrasive slurry.
This Slurry Abrasion Test Rig designed such that a standard specimen pressed against to rubber wheel with a known force. The test area is submerged wet abrasive slurry. The rotating wheel carries abrasive particles and causes sample wear. The sample is examined to determine wear.
Product Details:
| Minimum Order Quantity | 1 Piece |
| Abrasive Sand Particle Size | 200 micron |
| Speed | 100 - 500 rpm |
| Test Load | 45 - 130 N |
| Wheel Diameter | 228 mm |
The Dry Sand Abrasion Test Rig is used to study abrasion resistance of materials to dry sand. This test rig uses a rubber wheel, against which a test sample is pressed using a lever loaded by dead weights. Silica abrasive media is fed from a hopper using a nozzle. The nozzle ejects abrasive media between the rubber wheel and test sample. The test is run for a set number of revolutions. The test rig automatically shuts off after the preset number of revolutions are completed. Sample wear is measured by volume loss.